New Product Release!! Rear Wiper Delete Kits!!

SKY-WPR-DEL

Details:

The JBR Rear Wiper delete kit will clean up the rear of your hatchback for that shaved show car look.

The billet aluminum, black anodized outer cover utilizes a large diameter O-ring to keep the water out. A thick EPDM washer is utilized between the glass and the inside cap to eliminate any stress concentration know to cause windows to shatter.

SKY-WPR-DEL_01In addition to the clean look, there’s a reduction of 2lbs. of unnecessary weight.

There’s no permanent modifications made during the install and the wiper can be quickly and easily re-installed during the rainy and winter months.

Applications available:

- 2012 & Up Focus NA and Focus ST

- 2016 & Up Focus RS

- 2010 – 2013 Mazda 3 and Mazdaspeed 3

- 2014 & Up Mazda 3 hatchback

Features:

Designed and Manufactured in the USA

- Black anodized finish

- Simple bolt on kit

Kit Includes:

- 1 Outer cap with O-ring

- 1 Inner cap

- 1 inner rubber seal

- Stainless mounting hardware

- Installation instructions are available in our support section

- Shipping is free in the US & our Hassle Free Lifetime Warranty is included

SKY-WPR-DEL_02

 

MS3MZ3-WPR-DEL-1013_02

FNARSST-WPR-DEL_02

 

UTUBETwitter  Facebook 

New Product Release!! JBR Hood Scoop Insert for GEN 2 Mazdaspeed 3

MS3-VENT-INSRT

Details:
Add aggressive styling and improve the performance of your Mazdaspeed 3 with the JBR Hood Scoop Vented Insert.

When used in combination with a front mounted intercooler, the JBR Hood Scoop Insert helps lower boost air temperatures faster by reducing negative under-hood pressure.

It doesn’t increase boost air temperatures when used in combination with a factory top mounted intercooler with factory ducting in place.

It keeps rocks, birds, bugs and other debris out of you engine bay and prevents damage to top mounted intercoolers.

It’s a simple bolt on application carefully designed to fit perfectly.

Available Finishes:

  • Mirror Red
  • Mirror Black
  • Mirror Blue
  • Mirror Clear
  • Unfinished

MS3-VENT-INSRT_11

MS3-VENT-INSRT_10

 

MS3-VENT-INSRT_09

Application:

  • 2010-2013 Mazdaspeed 3

Features:

  • Designed and Manufactured in the USA
  • Several finish options for endless color combinations
  • Quick and easy installation

Kit Includes:

  • 1 hood scoop vented insert Cover
  • Installation instructions are available online in our support section
  • Shipping is free in the US & our Hassle Free Lifetime Warranty is included

MS3-VENT-INSRT_03

MS3-VENT-INSRT_02

MS3-VENT-INSRT_04

MS3-VENT-INSRT_01

 

UTUBETwitter  Facebook 

New Product Release!! JBR Radiator Cover 2010 & Up Mazdaspeed 3

IMG_5646

Add some color and clean up that ugly space between the engine and front bumper of you Mazdaspeed 3 with a JBR Radiator Cover.

The JBR Radiator Cover for the 2010 to 2013 Mazdaspeed 3 was designed using the latest in coordinate plotting technology guaranteeing a perfect fit.

It’s been cut from thick and durable polyurethane sheet that will last a lifetime and never chip or fade.

Adding the JBR Radiator Cover completely covers the core support area leaving you with a classy finished look to your engine bay. Available in Red, Blue or black, it’s sure to compliment any color scheme.

IMG_5703

IMG_5710

Application: 2010-2013 Mazdaspeed 3

Features:

  • Designed and Manufactured in the USA
  • Thick durable polyurethane construction
  • Quick and easy installation

Radiator Cover Kit Includes:

  • 1 Radiator Cover
  • Installation instructions are available online in our support section
  • Shipping is free in the US & our Hassle Free Lifetime Warranty is included

UTUBETwitter  Facebook 

New Product Release!! JBR 2016+ MX-5 ND/RF Rear Differential Mount

Details:
The JBR Rear Differential Mount for the 2016 & up Mazda MX-5 is a CAD designed direct fit OEM replacement. It’s machined out of lightweight yet incredibly strong 6061 billet aluminum. It’s not a weak cast aluminum part like the OEM mount which is prone to bending. 

It comes fitted with 80 durometer bushings to eliminate movement of the rear end in the subframe reducing wheel hop under hard straight line acceleration and when exiting a corner. Installing a JBR mount gets rid of the unwanted slop and flexing which allows for the power to go directly into rotating the tires, instead of flexing the soft rubber of the OEM mount. Giving you better feedback, sharper response and more predictability on throttle input.

Features:
  • Designed and manufactured in the USA
  • Weighs only 4lbs 8ozs. 1lb 2ozs more than the OEM
  • Anodized for corrosion resistance 

Application:

  • 2016+ Mazda Miata MX-5 ND/RF

The kit includes:

  • 1 Rear Differential Mount
  • Shipping is free in the US & our Hassle Free Lifetime Warranty is included
  • Installation instructions are available in our support section
UTUBETwitter  Facebook 

New Product Release!! Mazda 3 and Mazdaspeed 3 Oil Cooler Kits

Details:
Are you built and tuned? Are you a track Junkie? Are you both? Keeping the motor in your 2.3L DISI engine as cool as possible is going reduce knock and prolong engine life. Preventing the oil from exceeding normal operating temperatures will extend the life of your oil by reducing temperatures that prematurely break it down and increase engine wear. The OEM oil cooler uses a coolant based heat exchanger to keep the oil cool. Adding the JBR oil cooler will reduce the rise in coolant temperatures often seen when on track or during extreme temperature conditions.
 
The JBR Mazdspeed 3 Oil Cooler Kit employs a 19 row core constructed out of aluminum corrugated-fins & internal tubular plates greatly increasing both thermal efficiency and mechanical strength, so you get the smallest, lightest and more importantly, the most efficient oil cooler package.
 
Custom length commercial grade -10AN fittings and large ID stainless braided lines are the key to minimizing the pressure drop and making for an easy installation.
 
The polished billet aluminum sandwich plate incorporates an 1/8″ NPT port for additional gauges and sensors.
 
A custom mounting bracket and stainless steel hardware keep the core solidly mounted out front of the radiator maximizing its exposure to incoming airflow resulting in an oil temp reduction of over 28⁰F.
 
Applications
  • 2004-2013 Mazda 3
  • 2007-2013 Mazdaspeed 3*
 *Does not work with most conventional front mounted intercooler kits
 
Features:
  • Designed and Manufactured in the USA
  • Direct bolt on application
  • Corrugated-fin & tubular plate aluminum core
  • Commercial grade –AN10 fittings and large ID Stainless lines
  • +28⁰ drop in oil temps*
 
Includes:
  • 1 Oil cooler core
  • 2 Stainless braided hoses
  • 1 Sandwich plate & 2 1/8” NPT Plugs
  • 1 Application specific core mounting bracket
  • Stainless steel mounting hardware
  • 2 Aluminized fiber glass heat shield sleeves
  • Installation instructions are available in our support section
  • Shipping is free in the US & our Hassle Free Lifetime Warranty is included
 
*Ambient temperatures, track and road conditions, traffic and driving style can affect results.

 UTUBETwitter  Facebook 

Who’s tired of broken yellow zink sway bar brackets?

Who wants inexpensive high quality replacement bracket and bushing kits that will never rust or break and carry a lifetime warranty? Look no further!!
 
JBR now has our own line of replacement sway bar bushings and brackets for most all aftermarket front and rear sway bars. We also stock replacements for many OEM sway bars too!!
 
Did we mention these are warrantied for life and guaranteed never to rust or break??!!
 
If this wasn’t already pretty awesome, these are now the standard bushings and brackets included with EVERY JBR sway bar kit.
 
We know how tired everyone is having to replace broken sway bar brackets every year. NO MORE!!
 
Details:
No more cheap, rusted and broken yellow zinc coated sway bar brackets. JBR Sway Bar Bushings and Bracket kits are the toughest in the industry!
 
First, they’re laser cut out of .180″ thick stainless stainless steel which will never rust. This is nearly twice as thick as the typical bracket. They’re then die formed using our own propitiatory tooling that guarantees a perfect fit every time.
 
After forming, each bracket is then tapped to accept a grease fitting making maintenance simple and easy.
 
Included with every pair of JBR brackets are a set of 90a durometer bushings available in the most common OEM and aftermarket sizes.
 
Once you have these installed, you’ll never need to replace your sway bar brackets or bushings again.
 
Available Applications:
  • 2013+ Ford Focus ST OEM Rear
  • 2004-2009 Mazdaspeed 3 OEM Front & Rear
  • 2010-2013 Mazdaspeed 3 OEM Front
  • 2010-2013 Mazdaspeed 3 OEM Rear
  • 2004-2009 Mazda 3 OEM Front & Rear
  • 2010-2013 Mazda 3 OEM Front
  • 2010-2013 Mazda 3 OEM Rear
  • 2014+ Mazda 3 OEM Front
  • 2014+ Mazda 3 OEM Rear
  • 2006-2014 Mazda 5 OEM Front & Rear
  • 2013+ Mazda CX-5 OEM Front
  • 2013+ Mazda CX-5 OEM Rear
  • 2014+ Mazda 6 OEM Front
  • 2014+ Mazda 6 OEM Rear
  • 1.250″ (32mm) Aftermarket Rear Sway Bars
  • 1.125″ (28.5mm) Aftermarket Rear Sway Bars
 
Don’t see your application? Contact us, we probably have it.
 
Features:
  • Designed and manufactured in the USA
  • Stainless steel die formed construction
  • 90 durometer bushings
 
The JBR Tru-Torsion Sway Bar Bracket Kit Includes:
  • 2 Stainless sway bar brackets with grease fittings
  • 2 New 90 durometer polyurethane bushings
  • Lifetime warranty
 
UTUBETwitter  Facebook 

New Product Release!! Focus ST Oil Cooler Kits in Stock!

Details:
Are you tuned? Are you a track Junkie? Are you both? Within 10 minutes of being on track or an evening of repeatedly putting a few car lengths on your buddies STI, the oil temperature and coolant temperatures in your Focus ST can begin to rise in to unsafe territory which can eventually lead to overheating. Either of these conditions or a combination of both will result in prolonged excessive oil temperatures that prematurely breaks down the oil and increases engine wear.

The JBR Focus ST Oil Cooler Kit employs a 19 row core constructed out of aluminum corrugated-fins & internal tubular plates greatly increasing both thermal efficiency and mechanical strength, so you get the smallest, lightest and more importantly, the most efficient oil cooler package.

Custom length commercial grade -10AN fittings and large ID stainless braided lines are the key to minimizing the pressure drop and making for an easy installation.

The polished billet aluminum sandwich plate incorporates 2, 1/8” NPT ports for additional gauges and sensors.

Custom mounting brackets and stainless steel hardware keep the core solidly mounted out front of the radiator maximizing its exposure to incoming airflow resulting in an oil temp reduction of over 30⁰F.

Features:

  • Designed and Manufactured in the USA
  • Direct bolt on application
  • Corrugated-fin & tubular plate aluminum core
  • Commercial grade –AN10 fittings and large ID Stainless lines
  • +30⁰ drop in oil temps

Includes:

  • 1 Oil cooler core
  • 2 Stainless braided hoses
  • 1 Sandwich plate & 2 1/8” NPT Plugs
  • 2 Application specific core mounting brackets
  • 2 Aluminized fiber glass heat shield sleeves
  • Stainless steel mounting hardware
  • Installation instructions are available in our support section
  • Shipping is free in the US & our Hassle Free Lifetime Warranty is included

Follow us on social media for all the latest news, sneak peeks, and product releases.

UTUBETwitter  Facebook 

Suspension Part Three: The Pertinents

Going back to our last post (if you haven’t read Part Two yet, you should), we broke down the components of what makes up a coilover system, we’ve been over deciding that coilovers are really the best option and have discussed some of the key features of a set of coilovers. Now we need to dive deeper into some of the features that are icing on the cake. These are the bells and whistles found on premium suspension systems that make them worth that bit extra.

As you will recall, compression and rebound dampening are two major points of adjustment. Some coilovers offer only compression and other more  premium coilovers offer both. Why is this important? A vehicle in a track environment, or even on some twisty backroads, will receive four types of bias. Forward, rearward, left, and right bias are the four categories. When compression and rebound adjustments can be made, and those adjustments can be made on all for corners, then one can properly address all types of bias and conditions. This allows the user to tweak their suspension to perfection for any given condition and setup. Whether it be on the your daily driven street car, your dedicated track car or the more common daily driven track car, having control over your suspension is where it’s at.

Speaking of conditions, a primary concern of many is the ability to get great track performance out of a set of coilovers that is able to be driven with comfort on the street. Range of dampening is a key factor in this parameter. A set of coilovers labeled as “street” will typically have rather soft shocks. A set of coilovers labeled as “track” will conversely be rather stiff. Having a wide range of adjustability, being able to adjust both compression and rebound are what make a good set of coilovers great for both the street and the track!

Another very important feature found on a quality set of coilovers is camber adjustment. Often times the OEM suspension setup doesn’t allow for much if any camber adjustment. Camber or Camber angle is the angle between the verticle axis of the wheels and the vertical axis of the vehicle and can commonly be seen from the front or rear of the vehicle. If the top of the wheel is further “out” in relation to the bottom of the wheel, this is refereed to as positive camber. If the top of the wheel is “in” relative to the bottom, this is called negative camber. You will rarely see positive camber on a street car or road course car. You may see positive camber on an oval track car and it would only be found on the inside wheels. Negative camber is the more common setup due to the fact that it increases grip when cornering by increasing the tires contact patch. Having the ability to add additional negative camber over that obtainable with the OEM setup is a important feature of every driver that races their car. It’s even a requirement for those that just want to achieve a low ride height combined with the aggressive look of wider tires and need to get them tucked inside of the wheel well.

To adjust camber, coilovers employ what’s called camber plates to make these adjustments. You’ll primarily see them in the front simply because the front of most vehicles with the more common McPherson strut suspension do not have camber adjustment capability. This is not often the case with double wishbone suspension and coilovers for those vehicles typically do not come with camber plates.

Hmmm… I wonder if we can’t develop a set of coilovers that will be comfortable on the street, have both compression and rebound adjustability, camber adjustability where needed and perform the job duties on the track? Yes, Yes we can!

Now that the research is done and we know what we want out out a set of coilovers it’s time to build a few sets. With prototypes completed, the fun part is about to begin. The best part of being an aftermarket manufacturer is that testing needs to be done. We’re all car guys, so naturally taking the car to the track is not exactly a chore. It’s no secret that JBR is located in the greater St. Louis area. Aside from some AutoX action, there is not much venue for legal abuse to the extent that we’d like.

JBR’s testing process involved multiple levels. Typical spirited driving is in order for the entire JBR fleet and that happens frequently. What is the fun of owning a performance vehicle without driving it like it was designed? A step above is taken in the routine AutoX outing. Often times, when some early testing is needed on a new part, AutoX is a great tool. It is legal to get some abuse on the parts on this closed course, and gets some real world data based on how the parts will be used.

Although this is the routine light duty testing, the real stamp of approval needs to be received at the peak of conditions the parts will be subjected to. This is why frequent trips to various Midwestern tracks, such as Gingerman Raceway, Road America, Mid-Ohio and Pittsburgh International must be made to get proper testing done. High speeds and high cornering forces are coupled with extensive duty cycling at these venues.

Now what’s the beauty of owning a performance vehicle? We race the same cars that we get groceries with. Clearly being able to drive the car to the track, get the abuse in, and drive it back home would get the stamp of approval. This is where the beauty of the JBR prototype coilovers came into play. Not only did they perform extremely well on track, but off track as well. Due to the large range of compression and rebound adjustment incorporated into the dampers, the vehicle is able to achieve a cushy ride feel on the streets at the turn of a knob.

Follow us on social media for all the latest news, sneak peeks, and product releases.

UTUBETwitter  Facebook Email

 

 

 

 

New Product Release!! Focus ST Solid Transmission Cable Bracket Bushings

Details:
JBR Solid Transmission Cable Bracket Bushings replace the stock Focus ST rubber grommets that hold the shifter cable bracket assembly to the transmission.

The JBR Solid Shifter Bushings create more responsive shifts in your Focus. Having solid spacers removes the sloppy feeling from the shifter, greatly improves shifting accuracy and allows the driver a more connected driving experience.

Features:

  • Designed and Manufactured in the USA
  • Billet aluminum construction

Application:

  • 2013+ Ford Focus ST

Includes:

  • 3 male bushings
  • 3 female bushings
  • Installation instructions are available in our support section
  • Shipping is free in the US & our Hassle Free Lifetime Warranty is included

Follow us on social media for all the latest news, sneak peeks, and product releases.

UTUBETwitter  Facebook Email

ND Miata Front & Rear Sway Bars Available and Shipping Now!!

Details:
The JBR Tru-Torsion Front & Rear Sway Bars for the ND Miata significantly reduce body roll and greatly improve the vehicles ability to rotate.

They’re constructed out of 1.125″ diameter .125″ wall 4130 alloy tube for the front and .625” solid 4130 alloy bar for the rear. They’re then powder coated in your choice of red, blue or black for a beautiful look and long lasting corrosion resistance.

Both are 3-way adjustable allowing you to fine tune them for either the street or the track.
Included with each JBR sway bar is our very own sway bar brackets. They’re constructed out of .185″ thick stainless steel and come with 88 durometer bushings and grease fittings. These will never rust and never break. There’s also no need to reinforce the rear mounting points to use the JBR rear sway bar.

For those that must have the finer things in life, we also offer our Tru-Torsion billet aluminum sway bar brackets as an upgrade to the stainless at 30% off regular price. Both the stainless and the billet brackets carry our Lifetime Warranty.

Application:
- 2016 & up ND Miata all models

Features:
- Designed and Manufactured in the USA
- 4130 alloy steel construction
- Includes stiffer polyurethane bushings with thick stainless steel brackets and grease fittings
- FREE SHIPPING!! a $30.00 value!!

The JBR Sway Bar Kits Include:
- 1.125″ Front or .625” Rear 3-way adjustable sway bar
- New polyurethane mounting bushings & stainless steel brackets with grease fittings
- Installation grease
- Installation instructions are available in our support section
- Shipping is free in the US & our Hassle Free Lifetime Warranty is included on all included components

Important Notes:
- The Tru-Torsion Billet sway bar brackets require lowering for the the sub-frame (Front Only) one side at a time for installation. When done carefully, no alignment is needed. The included stainless brackets do not require the sub-frame to be lowered for installation front or rear.
- Installation of the front sway bar does not require disconnecting the steering shaft, lowering the rack and pinion or cutting off the OEM sway bar bushings.

 

Follow us on social media for all the latest news, sneak peeks, and product releases.

UTUBETwitter  Facebook Email