Login | Logout |

New Product Release!! Rear Wiper Delete Kits!!

SKY-WPR-DEL

Details:

The JBR Rear Wiper delete kit will clean up the rear of your hatchback for that shaved show car look.

The billet aluminum, black anodized outer cover utilizes a large diameter O-ring to keep the water out. A thick EPDM washer is utilized between the glass and the inside cap to eliminate any stress concentration know to cause windows to shatter.

SKY-WPR-DEL_01In addition to the clean look, there’s a reduction of 2lbs. of unnecessary weight.

There’s no permanent modifications made during the install and the wiper can be quickly and easily re-installed during the rainy and winter months.

Applications available:

– 2012 & Up Focus NA and Focus ST

– 2016 & Up Focus RS

– 2010 – 2013 Mazda 3 and Mazdaspeed 3

– 2014 & Up Mazda 3 hatchback

Features:

Designed and Manufactured in the USA

– Black anodized finish

– Simple bolt on kit

Kit Includes:

– 1 Outer cap with O-ring

– 1 Inner cap

– 1 inner rubber seal

– Stainless mounting hardware

– Installation instructions are available in our support section

– Shipping is free in the US & our Hassle Free Lifetime Warranty is included

SKY-WPR-DEL_02

 

MS3MZ3-WPR-DEL-1013_02

FNARSST-WPR-DEL_02

 

UTUBETwitter  Facebook 

New Product Release!! 2016 & Up Ford Focus RS Mud Flap Kit!!

Focus_RS-MF

Details:
JB ARMOR Mud Flaps are the highest quality flaps available at a price that’s now easier than ever to afford. Made from thick, 1/8” 80a durometer urethane, the same exact material used by the more expensive companies.

The JB Armor Mud Flap kit provides tough protection from rocks, road tar and mud. They will never break or chip in cold weather like rigid flaps and will withstand any form of abuse , on or off the road.

The JBR logo has been laser etched into the surface of each front mud flap and an RS logo into the rears creating a holographic effect that comes and goes when light catches it just right. Guaranteed never to fade like those that are painted on or peel of off like decals do.Focus_RS-MF_05

Application:
– Ford Focus RS 2016 & Up

Features:
– Designed and Manufactured in the USA
– Thick, durable polyurethane construction
– Stainless hardware

The JB ARMOR Mud Flap Kit Includes:
– 2 Front mud flaps
– 2 Rear mud flaps
– Stainless mounting brackets
– All Stainless mounting hardware
– Installation instructions are available in our support section
– Shipping is free in the US & our Hassle Free Lifetime Warranty is included

Focus_RS-MF_02

Focus_RS-MF_03

Focus_RS-MF_04

 

UTUBETwitter  Facebook 

New Product Release!! 2016 & Up Ford Focus RS PCV Oil Catch Can Kits!!

FRS-OCC_03

 

FRS-OCC_11

Details:
During everyday engine operation, blow-by gases, as well as oil vapor from the engines rotating assembly, pass through the PCV valve and are routed into the intake for the engine to burn off. Before ever making it into the cylinders, some of that oil mist and other contaminates adhere to the backside of the hot intake valves. Over time a thick crust forms significantly reducing performance and potentially leading to a costly cleaning or repair. This is especially a problem for the 2.3L motor because there’s no fuel (Direct Injection) passing over the valves to wash and keep them clean. This is why an OCC is a must have for the Ford Focus RS.

As the PCV gases enter the catch can a pressure drop occurs. The oil then begins to fall out of suspension as it flows through a series of 3 perforated filter plates. As the gases flow through the plates, the oil sticks and the gas is all that reaches the outlet at the top of the catch can. Oil that accumulates on the filter plates runs off and is collected in the bottom where a large 5/8″ quick drain makes emptying the catch can a breeze.

FRS-OCC_06

Throughout the life of the catch can, the perforated filter plates will never break down or need to be replaced like catch cans with screens and mesh filter material.

What’s wrong with the OEM PCV valve?
The short answer is nothing as long as you never reach maximum boost of the factory tune. The OEM PCV valve in the Focus RS is unable to seal completely and leaks under maximum boost.

Because the PCV valve is the heart of the PCV system, let’s take a minute to discuss it. This thing is notorious for not being able to completely close to prevent boost from entering the crankcase, even when brand new. Add a few thousand miles worth of crud flowing back and forth through and the worse it gets. And the more boost you run, the greater the problem becomes.

The optional check valve kit is designed to be closed 100% of the time unless vacuum is present. This check valve is oil, fuel and chemical resistant. It’s constructed from brass, it has an incredibly low crack pressure and it’s properly sized so that normal flow isn’t affected.

FRS-OCC_10

Unfortunately, the OEM check valve just can’t close instantly under boost and therefore crankcase pressure and turbo spool times are increased. For higher boosting cars or those seeking the best possible performance out of their engine, an OCC check valve is recommended.

Application:
– 2016 & up Ford Focus RS

Features:
– Designed and Manufactured in the USA
– Easily installed utilizing the supplied OEM factory fittings
– Hoses cut to length and pre-assembled
– Entirely constructed out of 6061 aluminum
– Precision TIG welding of all components
– Large 5/8″ easily operated drain valve

FRS-OCC_08

Includes:
– 1 Oil catch can
– Application specific mounting brackets
– Pre-assembled polyester reinforced oil, fuel and chemical resistant hose with factory fittings
– Stainless hose clamps
– Stainless mounting hardware
– Drain Hose
– Quick drain valve
– Check valve (Optional)
– Installation instructions are available in our support section
– Shipping is free in the US & our Hassle Free Lifetime Warranty is included

FRS-OCC_02

FRS-OCC_13

FRS-OCC_01

 

FRS-OCC_12

 

UTUBETwitter  Facebook 

 

New Product Release!! Mazda 3 and Mazdaspeed 3 Oil Cooler Kits

Details:
Are you built and tuned? Are you a track Junkie? Are you both? Keeping the motor in your 2.3L DISI engine as cool as possible is going reduce knock and prolong engine life. Preventing the oil from exceeding normal operating temperatures will extend the life of your oil by reducing temperatures that prematurely break it down and increase engine wear. The OEM oil cooler uses a coolant based heat exchanger to keep the oil cool. Adding the JBR oil cooler will reduce the rise in coolant temperatures often seen when on track or during extreme temperature conditions.
 
The JBR Mazdspeed 3 Oil Cooler Kit employs a 19 row core constructed out of aluminum corrugated-fins & internal tubular plates greatly increasing both thermal efficiency and mechanical strength, so you get the smallest, lightest and more importantly, the most efficient oil cooler package.
 
Custom length commercial grade -10AN fittings and large ID stainless braided lines are the key to minimizing the pressure drop and making for an easy installation.
 
The polished billet aluminum sandwich plate incorporates an 1/8″ NPT port for additional gauges and sensors.
 
A custom mounting bracket and stainless steel hardware keep the core solidly mounted out front of the radiator maximizing its exposure to incoming airflow resulting in an oil temp reduction of over 28⁰F.
 
Applications
  • 2004-2013 Mazda 3
  • 2007-2013 Mazdaspeed 3*
 *Does not work with most conventional front mounted intercooler kits
 
Features:
  • Designed and Manufactured in the USA
  • Direct bolt on application
  • Corrugated-fin & tubular plate aluminum core
  • Commercial grade –AN10 fittings and large ID Stainless lines
  • +28⁰ drop in oil temps*
 
Includes:
  • 1 Oil cooler core
  • 2 Stainless braided hoses
  • 1 Sandwich plate & 2 1/8” NPT Plugs
  • 1 Application specific core mounting bracket
  • Stainless steel mounting hardware
  • 2 Aluminized fiber glass heat shield sleeves
  • Installation instructions are available in our support section
  • Shipping is free in the US & our Hassle Free Lifetime Warranty is included
 
*Ambient temperatures, track and road conditions, traffic and driving style can affect results.

 UTUBETwitter  Facebook 

Who’s tired of broken yellow zink sway bar brackets?

Who wants inexpensive high quality replacement bracket and bushing kits that will never rust or break and carry a lifetime warranty? Look no further!!
 
JBR now has our own line of replacement sway bar bushings and brackets for most all aftermarket front and rear sway bars. We also stock replacements for many OEM sway bars too!!
 
Did we mention these are warrantied for life and guaranteed never to rust or break??!!
 
If this wasn’t already pretty awesome, these are now the standard bushings and brackets included with EVERY JBR sway bar kit.
 
We know how tired everyone is having to replace broken sway bar brackets every year. NO MORE!!
 
Details:
No more cheap, rusted and broken yellow zinc coated sway bar brackets. JBR Sway Bar Bushings and Bracket kits are the toughest in the industry!
 
First, they’re laser cut out of .180″ thick stainless stainless steel which will never rust. This is nearly twice as thick as the typical bracket. They’re then die formed using our own propitiatory tooling that guarantees a perfect fit every time.
 
After forming, each bracket is then tapped to accept a grease fitting making maintenance simple and easy.
 
Included with every pair of JBR brackets are a set of 90a durometer bushings available in the most common OEM and aftermarket sizes.
 
Once you have these installed, you’ll never need to replace your sway bar brackets or bushings again.
 
Available Applications:
  • 2013+ Ford Focus ST OEM Rear
  • 2004-2009 Mazdaspeed 3 OEM Front & Rear
  • 2010-2013 Mazdaspeed 3 OEM Front
  • 2010-2013 Mazdaspeed 3 OEM Rear
  • 2004-2009 Mazda 3 OEM Front & Rear
  • 2010-2013 Mazda 3 OEM Front
  • 2010-2013 Mazda 3 OEM Rear
  • 2014+ Mazda 3 OEM Front
  • 2014+ Mazda 3 OEM Rear
  • 2006-2014 Mazda 5 OEM Front & Rear
  • 2013+ Mazda CX-5 OEM Front
  • 2013+ Mazda CX-5 OEM Rear
  • 2014+ Mazda 6 OEM Front
  • 2014+ Mazda 6 OEM Rear
  • 1.250″ (32mm) Aftermarket Rear Sway Bars
  • 1.125″ (28.5mm) Aftermarket Rear Sway Bars
 
Don’t see your application? Contact us, we probably have it.
 
Features:
  • Designed and manufactured in the USA
  • Stainless steel die formed construction
  • 90 durometer bushings
 
The JBR Tru-Torsion Sway Bar Bracket Kit Includes:
  • 2 Stainless sway bar brackets with grease fittings
  • 2 New 90 durometer polyurethane bushings
  • Lifetime warranty
 
UTUBETwitter  Facebook 

New Product Release!! Focus ST Oil Cooler Kits in Stock!

Details:
Are you tuned? Are you a track Junkie? Are you both? Within 10 minutes of being on track or an evening of repeatedly putting a few car lengths on your buddies STI, the oil temperature and coolant temperatures in your Focus ST can begin to rise in to unsafe territory which can eventually lead to overheating. Either of these conditions or a combination of both will result in prolonged excessive oil temperatures that prematurely breaks down the oil and increases engine wear.

The JBR Focus ST Oil Cooler Kit employs a 19 row core constructed out of aluminum corrugated-fins & internal tubular plates greatly increasing both thermal efficiency and mechanical strength, so you get the smallest, lightest and more importantly, the most efficient oil cooler package.

Custom length commercial grade -10AN fittings and large ID stainless braided lines are the key to minimizing the pressure drop and making for an easy installation.

The polished billet aluminum sandwich plate incorporates 2, 1/8” NPT ports for additional gauges and sensors.

Custom mounting brackets and stainless steel hardware keep the core solidly mounted out front of the radiator maximizing its exposure to incoming airflow resulting in an oil temp reduction of over 30⁰F.

Features:

  • Designed and Manufactured in the USA
  • Direct bolt on application
  • Corrugated-fin & tubular plate aluminum core
  • Commercial grade –AN10 fittings and large ID Stainless lines
  • +30⁰ drop in oil temps

Includes:

  • 1 Oil cooler core
  • 2 Stainless braided hoses
  • 1 Sandwich plate & 2 1/8” NPT Plugs
  • 2 Application specific core mounting brackets
  • 2 Aluminized fiber glass heat shield sleeves
  • Stainless steel mounting hardware
  • Installation instructions are available in our support section
  • Shipping is free in the US & our Hassle Free Lifetime Warranty is included

Follow us on social media for all the latest news, sneak peeks, and product releases.

UTUBETwitter  Facebook 

Suspension Part Three: The Pertinents

Going back to our last post (if you haven’t read Part Two yet, you should), we broke down the components of what makes up a coilover system, we’ve been over deciding that coilovers are really the best option and have discussed some of the key features of a set of coilovers. Now we need to dive deeper into some of the features that are icing on the cake. These are the bells and whistles found on premium suspension systems that make them worth that bit extra.

As you will recall, compression and rebound dampening are two major points of adjustment. Some coilovers offer only compression and other more  premium coilovers offer both. Why is this important? A vehicle in a track environment, or even on some twisty backroads, will receive four types of bias. Forward, rearward, left, and right bias are the four categories. When compression and rebound adjustments can be made, and those adjustments can be made on all for corners, then one can properly address all types of bias and conditions. This allows the user to tweak their suspension to perfection for any given condition and setup. Whether it be on the your daily driven street car, your dedicated track car or the more common daily driven track car, having control over your suspension is where it’s at.

Speaking of conditions, a primary concern of many is the ability to get great track performance out of a set of coilovers that is able to be driven with comfort on the street. Range of dampening is a key factor in this parameter. A set of coilovers labeled as “street” will typically have rather soft shocks. A set of coilovers labeled as “track” will conversely be rather stiff. Having a wide range of adjustability, being able to adjust both compression and rebound are what make a good set of coilovers great for both the street and the track!

Another very important feature found on a quality set of coilovers is camber adjustment. Often times the OEM suspension setup doesn’t allow for much if any camber adjustment. Camber or Camber angle is the angle between the verticle axis of the wheels and the vertical axis of the vehicle and can commonly be seen from the front or rear of the vehicle. If the top of the wheel is further “out” in relation to the bottom of the wheel, this is refereed to as positive camber. If the top of the wheel is “in” relative to the bottom, this is called negative camber. You will rarely see positive camber on a street car or road course car. You may see positive camber on an oval track car and it would only be found on the inside wheels. Negative camber is the more common setup due to the fact that it increases grip when cornering by increasing the tires contact patch. Having the ability to add additional negative camber over that obtainable with the OEM setup is a important feature of every driver that races their car. It’s even a requirement for those that just want to achieve a low ride height combined with the aggressive look of wider tires and need to get them tucked inside of the wheel well.

To adjust camber, coilovers employ what’s called camber plates to make these adjustments. You’ll primarily see them in the front simply because the front of most vehicles with the more common McPherson strut suspension do not have camber adjustment capability. This is not often the case with double wishbone suspension and coilovers for those vehicles typically do not come with camber plates.

Hmmm… I wonder if we can’t develop a set of coilovers that will be comfortable on the street, have both compression and rebound adjustability, camber adjustability where needed and perform the job duties on the track? Yes, Yes we can!

Now that the research is done and we know what we want out out a set of coilovers it’s time to build a few sets. With prototypes completed, the fun part is about to begin. The best part of being an aftermarket manufacturer is that testing needs to be done. We’re all car guys, so naturally taking the car to the track is not exactly a chore. It’s no secret that JBR is located in the greater St. Louis area. Aside from some AutoX action, there is not much venue for legal abuse to the extent that we’d like.

JBR’s testing process involved multiple levels. Typical spirited driving is in order for the entire JBR fleet and that happens frequently. What is the fun of owning a performance vehicle without driving it like it was designed? A step above is taken in the routine AutoX outing. Often times, when some early testing is needed on a new part, AutoX is a great tool. It is legal to get some abuse on the parts on this closed course, and gets some real world data based on how the parts will be used.

Although this is the routine light duty testing, the real stamp of approval needs to be received at the peak of conditions the parts will be subjected to. This is why frequent trips to various Midwestern tracks, such as Gingerman Raceway, Road America, Mid-Ohio and Pittsburgh International must be made to get proper testing done. High speeds and high cornering forces are coupled with extensive duty cycling at these venues.

Now what’s the beauty of owning a performance vehicle? We race the same cars that we get groceries with. Clearly being able to drive the car to the track, get the abuse in, and drive it back home would get the stamp of approval. This is where the beauty of the JBR prototype coilovers came into play. Not only did they perform extremely well on track, but off track as well. Due to the large range of compression and rebound adjustment incorporated into the dampers, the vehicle is able to achieve a cushy ride feel on the streets at the turn of a knob.

Follow us on social media for all the latest news, sneak peeks, and product releases.

UTUBETwitter  Facebook Email

 

 

 

 

New Product Release!! Focus ST Solid Transmission Cable Bracket Bushings

Details:
JBR Solid Transmission Cable Bracket Bushings replace the stock Focus ST rubber grommets that hold the shifter cable bracket assembly to the transmission.

The JBR Solid Shifter Bushings create more responsive shifts in your Focus. Having solid spacers removes the sloppy feeling from the shifter, greatly improves shifting accuracy and allows the driver a more connected driving experience.

Features:

  • Designed and Manufactured in the USA
  • Billet aluminum construction

Application:

  • 2013+ Ford Focus ST

Includes:

  • 3 male bushings
  • 3 female bushings
  • Installation instructions are available in our support section
  • Shipping is free in the US & our Hassle Free Lifetime Warranty is included

Follow us on social media for all the latest news, sneak peeks, and product releases.

UTUBETwitter  Facebook Email

Suspension Part Two: The Breakdown

Going back to our last post (if you haven’t read Part One yet, you should), we discussed some suspension basics. We know that two major components in a suspension that can be upgraded to optimize performance are springs and dampers. Springs can be thought of as a coarse control, with the dampers  being a fine control. When looking for the most performance and flexibility for different conditions, a full replacement is best. This is commonly known as a coilover system.

When looking at coilover options, an abundance of offerings will be found. Where does one begin to make choices? Spring-rate, dampening, compression, rebound, and independent adjustability of these are all items to consider when choosing a coilover system.

Spring-rate is a large factor in how a coilover will perform. Simply put, the spring-rate is defined as the amount the spring deflects over a certain load capacity. This rating can be made in either kg/mm or lbs/in. You will see kg/mm often shown as “K” and lbs/in often shown as “#” or “lb”. To understand and compare different systems to one another, use this chart:

700 lb/in = 12.5 kg/mm
650 lb/in = 11.6 kg/mm
600 lb/in = 10.7 kg/mm
550 lb/in = 9.8 kg/mm
500 lb/in = 8.9 kg/mm
450 lb/in = 8 kg/mm
400 lb/in = 7.1 kg/mm
350 lb/in = 6.2 kg/mm
300 lb/in = 5.3 kg/mm
250 lb/in = 4.5 kg/mm

So what does this mean? The stiffer the spring, the more load it will take to compress it. Essentially, body roll in cornering will become less when spring-rate is increased. Spring-rate is generally fixed rate on a set of coilovers. This coarse control by itself would result in a very “springy” ride. Rather than a tire staying planted on the tarmac, with a load applied, it would waiver between loaded and unloaded. An unloaded corner makes for loss of grip. This is where dampening comes in.

Compression dampening is the rate of reaction to a change in compression. This is the car pushing down onto the surface. The rate at which the piston compresses directly relates to the amount of compression dampening. This essentially aides the spring in absorbing fine changes in force exerted. This can be bumps in the road, slight turns, or say the car ends up on the rumble strips.

Rebound dampening does the opposite of compression, go figure. Rebound force comes into play when force is lessened on the road, say at the bottom of a dip in a pothole, in the bottom of a bump in the road, or on the exit of a turn.  More rebound will create more response on weight transfer out of a corner.

One can see how having a fixed spring-rate means that compression and rebound adjustability shifts the burden of your choice onto these variables. Most coilovers will be advertised based on how many clicks are on the dial. This refers to how many different settings there are for dampening. Although more options are better, this is not always the whole story. The range that these choices cover is really the thing to be looking at. Most users will be wanting to track their vehicle, but also have the flexibility to have a bearable ride on the street. A set of coilovers with tons of adjustments on one end of the spectrum does the user no good on the other end. This is why range is key.

Not only is range of concern, but compression and rebound do not always go hand it hand. To really dial a vehicle in for a specific setup and circumstance, these variables should be able to be controlled separate of one another. Though this feature is not something that is seen on the bulk of the coilovers on the market, it is available on quite a few and should be sought after if budget allows.

Ultimately, one must consider the use of the vehicle to make a decision. Often times, paying a little bit more money for a gain in versatility is a good choice. The better range of options offered, the more likely the coilovers will be able to accommodate for the various situations to be encountered.

Next in the series Suspension Part Three: The Pertinents

Follow us on social media for all the latest news, sneak peeks, and product releases.

UTUBETwitter  Facebook Email

Free JBR Phone, Tablet, AccessPort & Desktop Backgrounds

Here’s a perfect pairing to go with the parts you love. Show off your support for JBR with these free Phone, Tablet, Ford MFT and Desktop Backgrounds. From your computer, click on the image, then right click and save. From your phone or tablet, tap the image then hold down on the image and download.

Enjoy and Thanks for your support!!

Phone & Tablet Background

Desktop Background

Ford MFT

COBB AccessPort Background

Follow us on social media for all the latest news, sneak peeks, and product releases.

UTUBETwitter  Facebook Email