New Product Release!! JBR 2016+ Mazda Miata ND/RF Oil Cooler Kits!!

Details:

Are you tuned? Are you a track Junkie? Are you both? Keeping the oil in your 2.0L MX-5 engine as cool as possible is going reduce knock and prolong engine life. Preventing the oil from exceeding normal operating temperatures will extend the life of your oil by reducing temperatures that prematurely break it down and increase engine wear. In addition to keeping the oil temps under control, adding the JBR oil cooler will reduce the rise in coolant temperatures often seen when on track or during extreme temperature conditions. The lack of an oil cooler from the factory makes the JBR oil cooler an essential addition for those that push their MX-5 to the limit.

The JBR Oil Cooler Kit employs a 19 row core constructed out of aluminum corrugated-fins & internal tubular plates greatly increasing both thermal efficiency and mechanical strength, so you get the smallest, lightest and more importantly, the most efficient oil cooler package. 

Application specific -10AN fittings and large ID stainless braided lines are the key to minimizing the pressure drop and making for an easy installation. 

The polished billet aluminum sandwich plate incorporates an 1/8″ NPT port for additional gauges and sensors. 

An application specific mounting bracket and stainless steel hardware keep the core solidly mounted out front of the radiator maximizing its exposure to incoming airflow resulting in an oil temp reduction of over 54⁰F. 

Applications: - 2016 and Up ND/RF 

Features:

- Designed and Manufactured in the USA
- Direct bolt on application
- Corrugated-fin & tubular plate aluminum core
- Aluminum –AN10 fittings and Stainless lines
- +54⁰ drop in oil temps*

Includes:

- 1 Oil cooler core
- 2 Stainless braided hoses
- 1 Sandwich plate & 2 1/8” NPT Plugs 
- 1 Application specific core mounting bracket
- Stainless steel mounting hardware
- 2 Aluminized fiber glass heat shield sleeves
- Installation instructions are available in our support section
- Shipping is free in the US & our Hassle Free Lifetime Warranty is included

*Ambient temperatures, track and road conditions, traffic and driving style can affect results.

UTUBETwitter  Facebook 

New Product Release!! JB Armor 2016+ Mazda Miata ND/RF Mud Flap Kits!!

 

Details:

JB ARMOR Mud Flaps are the highest quality flaps available at a price that’s now easier than ever to afford. Made from thick, 1/8” 80 durometer urethane, the same exact material used by the more expensive companies..



Tough protection from rocks, road tar and mud that will withstand any form of abuse, on or off the road. The JBR brand logo has been laser etched in to the surface of each front flap and an the option of having the Miata script, JBR brand logo or no etching is available for the rear. The etching is guaranteed never to fade or chip like those that are painted on or fall of off like decals.

Features:

- Designed and Manufactured in the USA
- Thick 80 durometer urethane construction
- Laser etched logo*

*All front come with the JBR logo. Options apply to rear flaps only.

Application:

2016+ ND/RF

Includes:

- 2 Front Mud Flaps
- 2 Rear Mud Flaps
- Stainless Mounting Hardware
- Installation instructions are available in our support section
- Shipping is free in the US & our Hassle Free Lifetime Warranty is included

3

 

UTUBETwitter  Facebook 

New Product Release!! Rear Wiper Delete Kits!!

SKY-WPR-DEL

Details:

The JBR Rear Wiper delete kit will clean up the rear of your hatchback for that shaved show car look.

The billet aluminum, black anodized outer cover utilizes a large diameter O-ring to keep the water out. A thick EPDM washer is utilized between the glass and the inside cap to eliminate any stress concentration know to cause windows to shatter.

SKY-WPR-DEL_01In addition to the clean look, there’s a reduction of 2lbs. of unnecessary weight.

There’s no permanent modifications made during the install and the wiper can be quickly and easily re-installed during the rainy and winter months.

Applications available:

- 2012 & Up Focus NA and Focus ST

- 2016 & Up Focus RS

- 2010 – 2013 Mazda 3 and Mazdaspeed 3

- 2014 & Up Mazda 3 hatchback

Features:

Designed and Manufactured in the USA

- Black anodized finish

- Simple bolt on kit

Kit Includes:

- 1 Outer cap with O-ring

- 1 Inner cap

- 1 inner rubber seal

- Stainless mounting hardware

- Installation instructions are available in our support section

- Shipping is free in the US & our Hassle Free Lifetime Warranty is included

SKY-WPR-DEL_02

 

MS3MZ3-WPR-DEL-1013_02

FNARSST-WPR-DEL_02

 

UTUBETwitter  Facebook 

New Product Release!! JBR Hood Scoop Insert for GEN 2 Mazdaspeed 3

MS3-VENT-INSRT

Details:
Add aggressive styling and improve the performance of your Mazdaspeed 3 with the JBR Hood Scoop Vented Insert.

When used in combination with a front mounted intercooler, the JBR Hood Scoop Insert helps lower boost air temperatures faster by reducing negative under-hood pressure.

It doesn’t increase boost air temperatures when used in combination with a factory top mounted intercooler with factory ducting in place.

It keeps rocks, birds, bugs and other debris out of you engine bay and prevents damage to top mounted intercoolers.

It’s a simple bolt on application carefully designed to fit perfectly.

Available Finishes:

  • Mirror Red
  • Mirror Black
  • Mirror Blue
  • Mirror Clear
  • Unfinished

MS3-VENT-INSRT_11

MS3-VENT-INSRT_10

 

MS3-VENT-INSRT_09

Application:

  • 2010-2013 Mazdaspeed 3

Features:

  • Designed and Manufactured in the USA
  • Several finish options for endless color combinations
  • Quick and easy installation

Kit Includes:

  • 1 hood scoop vented insert Cover
  • Installation instructions are available online in our support section
  • Shipping is free in the US & our Hassle Free Lifetime Warranty is included

MS3-VENT-INSRT_03

MS3-VENT-INSRT_02

MS3-VENT-INSRT_04

MS3-VENT-INSRT_01

 

UTUBETwitter  Facebook 

New Product Release!! 2016 & Up Ford Focus RS Mud Flap Kit!!

Focus_RS-MF

Details:
JB ARMOR Mud Flaps are the highest quality flaps available at a price that’s now easier than ever to afford. Made from thick, 1/8” 80a durometer urethane, the same exact material used by the more expensive companies.

The JB Armor Mud Flap kit provides tough protection from rocks, road tar and mud. They will never break or chip in cold weather like rigid flaps and will withstand any form of abuse , on or off the road.

The JBR logo has been laser etched into the surface of each front mud flap and an RS logo into the rears creating a holographic effect that comes and goes when light catches it just right. Guaranteed never to fade like those that are painted on or peel of off like decals do.Focus_RS-MF_05

Application:
- Ford Focus RS 2016 & Up

Features:
- Designed and Manufactured in the USA
- Thick, durable polyurethane construction
- Stainless hardware

The JB ARMOR Mud Flap Kit Includes:
- 2 Front mud flaps
- 2 Rear mud flaps
- Stainless mounting brackets
- All Stainless mounting hardware
- Installation instructions are available in our support section
- Shipping is free in the US & our Hassle Free Lifetime Warranty is included

Focus_RS-MF_02

Focus_RS-MF_03

Focus_RS-MF_04

 

UTUBETwitter  Facebook 

New Product Release!! 2016 & Up Ford Focus RS PCV Oil Catch Can Kits!!

FRS-OCC_03

 

FRS-OCC_11

Details:
During everyday engine operation, blow-by gases, as well as oil vapor from the engines rotating assembly, pass through the PCV valve and are routed into the intake for the engine to burn off. Before ever making it into the cylinders, some of that oil mist and other contaminates adhere to the backside of the hot intake valves. Over time a thick crust forms significantly reducing performance and potentially leading to a costly cleaning or repair. This is especially a problem for the 2.3L motor because there’s no fuel (Direct Injection) passing over the valves to wash and keep them clean. This is why an OCC is a must have for the Ford Focus RS.

As the PCV gases enter the catch can a pressure drop occurs. The oil then begins to fall out of suspension as it flows through a series of 3 perforated filter plates. As the gases flow through the plates, the oil sticks and the gas is all that reaches the outlet at the top of the catch can. Oil that accumulates on the filter plates runs off and is collected in the bottom where a large 5/8″ quick drain makes emptying the catch can a breeze.

FRS-OCC_06

Throughout the life of the catch can, the perforated filter plates will never break down or need to be replaced like catch cans with screens and mesh filter material.

What’s wrong with the OEM PCV valve?
The short answer is nothing as long as you never reach maximum boost of the factory tune. The OEM PCV valve in the Focus RS is unable to seal completely and leaks under maximum boost.

Because the PCV valve is the heart of the PCV system, let’s take a minute to discuss it. This thing is notorious for not being able to completely close to prevent boost from entering the crankcase, even when brand new. Add a few thousand miles worth of crud flowing back and forth through and the worse it gets. And the more boost you run, the greater the problem becomes.

The optional check valve kit is designed to be closed 100% of the time unless vacuum is present. This check valve is oil, fuel and chemical resistant. It’s constructed from brass, it has an incredibly low crack pressure and it’s properly sized so that normal flow isn’t affected.

FRS-OCC_10

Unfortunately, the OEM check valve just can’t close instantly under boost and therefore crankcase pressure and turbo spool times are increased. For higher boosting cars or those seeking the best possible performance out of their engine, an OCC check valve is recommended.

Application:
- 2016 & up Ford Focus RS

Features:
- Designed and Manufactured in the USA
- Easily installed utilizing the supplied OEM factory fittings
- Hoses cut to length and pre-assembled
- Entirely constructed out of 6061 aluminum
- Precision TIG welding of all components
- Large 5/8″ easily operated drain valve

FRS-OCC_08

Includes:
- 1 Oil catch can
- Application specific mounting brackets
- Pre-assembled polyester reinforced oil, fuel and chemical resistant hose with factory fittings
- Stainless hose clamps
- Stainless mounting hardware
- Drain Hose
- Quick drain valve
- Check valve (Optional)
- Installation instructions are available in our support section
- Shipping is free in the US & our Hassle Free Lifetime Warranty is included

FRS-OCC_02

FRS-OCC_13

FRS-OCC_01

 

FRS-OCC_12

 

UTUBETwitter  Facebook 

 

New Product Release!! JBR Radiator Cover 2010 & Up Mazdaspeed 3

IMG_5646

Add some color and clean up that ugly space between the engine and front bumper of you Mazdaspeed 3 with a JBR Radiator Cover.

The JBR Radiator Cover for the 2010 to 2013 Mazdaspeed 3 was designed using the latest in coordinate plotting technology guaranteeing a perfect fit.

It’s been cut from thick and durable polyurethane sheet that will last a lifetime and never chip or fade.

Adding the JBR Radiator Cover completely covers the core support area leaving you with a classy finished look to your engine bay. Available in Red, Blue or black, it’s sure to compliment any color scheme.

IMG_5703

IMG_5710

Application: 2010-2013 Mazdaspeed 3

Features:

  • Designed and Manufactured in the USA
  • Thick durable polyurethane construction
  • Quick and easy installation

Radiator Cover Kit Includes:

  • 1 Radiator Cover
  • Installation instructions are available online in our support section
  • Shipping is free in the US & our Hassle Free Lifetime Warranty is included

UTUBETwitter  Facebook 

New Product Release!! JBR 2016+ MX-5 ND/RF Rear Differential Mount

Details:
The JBR Rear Differential Mount for the 2016 & up Mazda MX-5 is a CAD designed direct fit OEM replacement. It’s machined out of lightweight yet incredibly strong 6061 billet aluminum. It’s not a weak cast aluminum part like the OEM mount which is prone to bending. 

It comes fitted with 80 durometer bushings to eliminate movement of the rear end in the subframe reducing wheel hop under hard straight line acceleration and when exiting a corner. Installing a JBR mount gets rid of the unwanted slop and flexing which allows for the power to go directly into rotating the tires, instead of flexing the soft rubber of the OEM mount. Giving you better feedback, sharper response and more predictability on throttle input.

Features:
  • Designed and manufactured in the USA
  • Weighs only 4lbs 8ozs. 1lb 2ozs more than the OEM
  • Anodized for corrosion resistance 

Application:

  • 2016+ Mazda Miata MX-5 ND/RF

The kit includes:

  • 1 Rear Differential Mount
  • Shipping is free in the US & our Hassle Free Lifetime Warranty is included
  • Installation instructions are available in our support section
UTUBETwitter  Facebook 

New Product Release!! Mazda 3 and Mazdaspeed 3 Oil Cooler Kits

Details:
Are you built and tuned? Are you a track Junkie? Are you both? Keeping the motor in your 2.3L DISI engine as cool as possible is going reduce knock and prolong engine life. Preventing the oil from exceeding normal operating temperatures will extend the life of your oil by reducing temperatures that prematurely break it down and increase engine wear. The OEM oil cooler uses a coolant based heat exchanger to keep the oil cool. Adding the JBR oil cooler will reduce the rise in coolant temperatures often seen when on track or during extreme temperature conditions.
 
The JBR Mazdspeed 3 Oil Cooler Kit employs a 19 row core constructed out of aluminum corrugated-fins & internal tubular plates greatly increasing both thermal efficiency and mechanical strength, so you get the smallest, lightest and more importantly, the most efficient oil cooler package.
 
Custom length commercial grade -10AN fittings and large ID stainless braided lines are the key to minimizing the pressure drop and making for an easy installation.
 
The polished billet aluminum sandwich plate incorporates an 1/8″ NPT port for additional gauges and sensors.
 
A custom mounting bracket and stainless steel hardware keep the core solidly mounted out front of the radiator maximizing its exposure to incoming airflow resulting in an oil temp reduction of over 28⁰F.
 
Applications
  • 2004-2013 Mazda 3
  • 2007-2013 Mazdaspeed 3*
 *Does not work with most conventional front mounted intercooler kits
 
Features:
  • Designed and Manufactured in the USA
  • Direct bolt on application
  • Corrugated-fin & tubular plate aluminum core
  • Commercial grade –AN10 fittings and large ID Stainless lines
  • +28⁰ drop in oil temps*
 
Includes:
  • 1 Oil cooler core
  • 2 Stainless braided hoses
  • 1 Sandwich plate & 2 1/8” NPT Plugs
  • 1 Application specific core mounting bracket
  • Stainless steel mounting hardware
  • 2 Aluminized fiber glass heat shield sleeves
  • Installation instructions are available in our support section
  • Shipping is free in the US & our Hassle Free Lifetime Warranty is included
 
*Ambient temperatures, track and road conditions, traffic and driving style can affect results.

 UTUBETwitter  Facebook 

Who’s tired of broken yellow zink sway bar brackets?

Who wants inexpensive high quality replacement bracket and bushing kits that will never rust or break and carry a lifetime warranty? Look no further!!
 
JBR now has our own line of replacement sway bar bushings and brackets for most all aftermarket front and rear sway bars. We also stock replacements for many OEM sway bars too!!
 
Did we mention these are warrantied for life and guaranteed never to rust or break??!!
 
If this wasn’t already pretty awesome, these are now the standard bushings and brackets included with EVERY JBR sway bar kit.
 
We know how tired everyone is having to replace broken sway bar brackets every year. NO MORE!!
 
Details:
No more cheap, rusted and broken yellow zinc coated sway bar brackets. JBR Sway Bar Bushings and Bracket kits are the toughest in the industry!
 
First, they’re laser cut out of .180″ thick stainless stainless steel which will never rust. This is nearly twice as thick as the typical bracket. They’re then die formed using our own propitiatory tooling that guarantees a perfect fit every time.
 
After forming, each bracket is then tapped to accept a grease fitting making maintenance simple and easy.
 
Included with every pair of JBR brackets are a set of 90a durometer bushings available in the most common OEM and aftermarket sizes.
 
Once you have these installed, you’ll never need to replace your sway bar brackets or bushings again.
 
Available Applications:
  • 2013+ Ford Focus ST OEM Rear
  • 2004-2009 Mazdaspeed 3 OEM Front & Rear
  • 2010-2013 Mazdaspeed 3 OEM Front
  • 2010-2013 Mazdaspeed 3 OEM Rear
  • 2004-2009 Mazda 3 OEM Front & Rear
  • 2010-2013 Mazda 3 OEM Front
  • 2010-2013 Mazda 3 OEM Rear
  • 2014+ Mazda 3 OEM Front
  • 2014+ Mazda 3 OEM Rear
  • 2006-2014 Mazda 5 OEM Front & Rear
  • 2013+ Mazda CX-5 OEM Front
  • 2013+ Mazda CX-5 OEM Rear
  • 2014+ Mazda 6 OEM Front
  • 2014+ Mazda 6 OEM Rear
  • 1.250″ (32mm) Aftermarket Rear Sway Bars
  • 1.125″ (28.5mm) Aftermarket Rear Sway Bars
 
Don’t see your application? Contact us, we probably have it.
 
Features:
  • Designed and manufactured in the USA
  • Stainless steel die formed construction
  • 90 durometer bushings
 
The JBR Tru-Torsion Sway Bar Bracket Kit Includes:
  • 2 Stainless sway bar brackets with grease fittings
  • 2 New 90 durometer polyurethane bushings
  • Lifetime warranty
 
UTUBETwitter  Facebook